The application of reflective materials is becoming more and more extensive in life. As people begin to understand their advantages, there are many aspects of development and development. The inverse reflection function of light is an important principle of reflective materials. Reflector is an important application of reflective material in traffic sign industry. The main function of reflective car sticker is to reduce the occurrence of accidents, improve the safety of driving, and need to pay attention to some requirements when sticking the reflective car stickers.
Different levels of body reflective identification materials should not be applied to the rear part of vehicle. The sum of the area of the reflector and the reflector should be equal to 0.1m2 when using the first class body reflection material, and the sum of the area of the reflector should be greater than 0.2m2 when the material is identified with the two stage body reflector.
The back light of the rear body should reflect the width and height of the rear part of the vehicle as far as possible. The back light logo of the body which is pasted horizontally embodies the width of the rear part of the vehicle. The back light logo of the body perpendicular to the edge of the rear side reflects the height of the rear part of the vehicle, and the intersection part of the rear corner of the cargo box should be a white unit. The freight cars with partial total mass less than or equal to 4500kg can be red or white when the rear compartment structure can not meet the requirement of intersection of white elements.
The stickup of the reflection mark of the side body is allowed to be interrupted, but its total length (excluding the interval) should be greater than 50% of the length of the car, and the length of each continuous section should be greater than equal to 300mm, and should contain at least one unit in the red and white body reflector, and the interval of the two level body reflective marking material should be less than equal to 150mm. The interval between car body reflective marking material should be less than or equal to 300mm, and paste should be evenly distributed as far as possible.
Plate truck, flat trailer, low flat trailer, container trailer sticker is a sample of two level body reflective material sticker, if the back of the plate can not paste, should be in the rear lower protection device level and continuous paste two rows of body anti light logo, pasted area should be greater than 0.2m2.
The main role of reflective car stickers is to improve the surface performance of traffic signs, so that they can adapt to the all weather traffic needs and improve the safe operation conditions of roads. Reflective film is a layer structure composed of multilayer and different performance materials. Different reflective films have different layer structures.
